How To Make A Standing Mirror

Download Commodity

Download Article

A i-sided mirror, otherwise known every bit a 2-way mirror, creates a cool illusion where i side of the drinking glass is reflective and the other is nighttime. This can help you add a sense of privacy to your home, and can too be a useful improver to certain workspaces, similar a police station or hospital.^[1] While you can become 1-way glass installed in your home professionally, you tin hands create a ane-sided mirror of your own using two-mode window motion-picture show along with a section of drinking glass or a pre-existing window. Information technology only takes a few minutes to employ the flick, and and so a few days for the film to dry completely. To get the most out of your mirror, adjust the lighting on both sides of the drinking glass to make the illusion really powerful.

1. 1

   Cull a window or piece of drinking glass to plow into a one-sided mirror. Take hold of a blank department of glass, or find a window in your home that yous'd like to turn into a one-sided mirror. Proceed in mind that ane-sided mirrors are more similar windows, and help you secretly encounter into another area without beingness detected.^[two]

   • Typically, one-sided mirrors are used in places like constabulary questioning rooms, where police force officers can observe the suspect without the doubtable seeing them.^[three]

2. 2

   Trim ii-way mirror film to match the size of your glass. Measure the sides of your glass or windowpane and jot the measurements down on a separate canvas of paper. Lay out a department of ii-way mirror film on a flat surface, then cut out a section of motion-picture show that roughly matches the dimensions of your glass or window. Information technology's okay if the measurements aren't exact—you tin ever cutting off the excess later. Always have more motion-picture show than you demand, so the glass is completely covered.^[iv]

   • You tin buy two-way mirror film online.
   • Yous'll accept an easier time cutting the film with a retractable pocketknife, every bit opposed to a pair of scissors.

   Advertisement

3. iii

   Clean off both sides of the glass. Spritz glass cleaner on both sides of your window or glass. Wipe down any smudges or dirt with a clean fabric, so the two-fashion mirror film volition await clean and clear later on on.^[5]

4. 4

   Wipe off any dust or smudges with a microfiber cloth. Grab a microfiber cloth and look for whatever leftover lint, grit, or grime that's still stuck to the window. Brush away any visible blemishes from the drinking glass or window so the surface volition look clean beneath the two-way motion-picture show.^[6]

5. 5

   Skid on some gloves so the glass stays clean. Look for a pair of disposable gloves, which volition forbid you lot from getting your fingerprints on the glass or two-mode window film. If possible, avoid treatment the film with your blank hands.^[vii]

   • Any kind of latex or safe gloves will piece of work well for this.

6. 6

   Stick 2 sections of clear record along the shortest, pinnacle edge of your film. Rip away a pocket-size foursquare of clear record and press it along the height, upper edge along 1 side of the film. Repeat this procedure by placing another square of tape on the height, upper edge along the reverse side of the film. At this signal, the sticky sides of both tape pieces volition be facing one some other.^[8]

   • Don't stick these pieces of tape together or allow them overlap.

7. seven

   Pull the protective layer off the rest of the picture. Pinch both pieces of tape with your fingers and slowly drag the liner away from the sticky portion of the film. Continue pulling the piece of tape backward until the liner is completely peeled away, and the sticky side is totally exposed.^[9]

Advertisement

1. 1

   Create a soapy water solution in a spray bottle. Take an empty, 32  fl oz (950 mL) spray bottle and fill it with lukewarm water. Mix in around vi-viii drops of gentle soap or baby shampoo into the water until suds form.^[ten]

2. 2

   Spray the surface of the glass and the film with the solution. Coat the entire surface of your glass or window with soapy water, equally this volition help the picture stay put. One time yous've done this, spritz a big corporeality of soapy h2o over the sticky, exposed surface of your two-manner window film.^[11]

   • It may assistance to accept someone else hold the moving picture while you spray over it.

3. 3

   Center the flick over the drinking glass on the side y'all want to be dark. Pinch the sides of the wet film and suit it face up-down on the center of the wet drinking glass. Shift the motion-picture show around with your fingers to tweak the film and make certain it'south centered over the glass or window. If you lot're having trouble adjusting the film, pull back a corner of the film and spritz a small amount of soapy water beneath it.^[12]

   • Double-check that the film is exactly the way you want it earlier you continue.
   • Be sure to position the film on the side of the "participant," and not the "observer." The participant will only see a tinted section of glass, while the observer will have a transparent view of the participant.

4. 4

   Squeegee out whatsoever bubbling or wrinkles in the picture show. Catch a car duster and cover it with a towel so you don't scratch the surface of your film. Start from the middle of the film and work your way out, forcing away whatever bubbles and wrinkles as you go. Repeat this procedure until the motion picture is completely smooth.^[13]

   • Don't worry if in that location are a few tiny bubbles leftover in the film—these will get away on their ain.

5. five

   Blot away any leftover wet on the glass. Press a towel or clean microfiber material along the surface to soak up any leftover soapy h2o on your 2-way window motion-picture show. Don't rub or swipe with the cloth—instead, focus on dabbing and soaking up the moisture instead.^[14]

6. 6

   Trim away any excess film from the mirror. Take a retractable knife and go around the edges of the window or drinking glass. Remove any extra scraps and brand sure the motion picture evenly covers the surface of your window or glass.^[15]

7. vii

   Spritz more than solution over the pic and go over the film with a squeegee. Get the surface of the motion picture wet one more time to ensure that the flick is really stuck to the glass. Squeegee from the center of the film and work your way out.^[16]

8. 8

   Look several days for the pic to dry. Don't touch or mess around with the film—instead, wait 3-four days for the film to attach fully to the glass. One time the film is completely dry out, you'll exist set to use your new one-sided mirror!^[17]

Advertisement

1. 1

   Turn the lights upwards on the side of the mirror without any moving picture. Keep in mind that ane-sided mirrors have an observer and a participant, with only the observer existence able to see what the participant is doing. Cheque that the participant's side of the window is very well-lit, which makes it extra difficult to encounter through the tinted glass.^[18]

   • For case, yous can fix a lamp or 2 in the room, or identify a bright overhead lamp in the area.

https://sightandsoundindia.com/custom-home-theatre/

1. 1

   • If your film is on an exterior window, you don't have to worry about lighting as much.

2. 2

   Continue the "observation" side of the mirror as dark equally possible. Bank check that the lights on the "observer" side are dimmed, which makes information technology extremely difficult for the participant to notice anything behind the glass. If necessary, set upward blackout curtains, which will make the area even darker.^[19]

   • You tin can besides pigment the room a night color to help blend in.

3. 3

   Test your new mirror. Enquire someone to stand on the "participant" side of the mirror, while you stand up on the "observer" side. Call or text the other person and enquire if they can see you. With the two-way film and the lighting set-up, you should be totally invisible to the other person!^[20]

Advertisement

Ask a Question

200 characters left

Include your e-mail accost to get a message when this question is answered.

Submit

Advertisement

Things You'll Need

• Two-way mirror moving-picture show
• Glass
• Glass cleaner
• Soapy water solution
• Spray bottle
• Microfiber cloth
• Gloves
• Clear record
• Squeegee
• Retractable knife

• If you lot have the budget for it, talk to a professional contractor near installing special one-fashion glass in your home.

Thank you for submitting a tip for review!

Advertizement

About This Article

Thanks to all authors for creating a page that has been read 22,936 times.

Did this commodity help yous?

Source: https://www.wikihow.com/Make-a-One%E2%80%90Sided-Mirror

Share this post